American Standard Saver Tub Installation Instructions

Posted : admin | On 14-05-2021

™

754748-100 Rev. B

The tub is provided with an integral base for easier installation. If it was not installed in accordance with American Standard’s instructions;.

Thank you for selecting American-Standard...the benchmark of fine quality

for over 100 years.To ensure that your installation proceeds smoothly—please

American Standard Saver Soaking Bathtub 2946.112.011 Arctic. Installation Instructions. American Standard Saver 60X34 Integral Apron Bathtub, Left-Hand Drain. Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. INSTALLATION INSTRUCTIONS. This product is heavy and may.

read these instructions carefully before you begin.

TOOLS:

Unpack your new bath tub walls and inspect them carefully for damage.Verify that the walls are the correct size for your

installation. Refer to American Standard roughing-in information for specific dimensions for each model.

NOTE: Take extra care in handling the front surfaces of the walls. Use only non-abrasive cloths to avoid scratching.

• Tape Measure

• Pencil

• Level

• Acrylic/Latex or Acrylic/Silicone Sealant

screws 3/4' minimum length

• 2 x 4 lumber for additional wall studs as required

• 1 x 4’s if installing shower doors

American Standard Saver Tub Door

FOR TOLL FREE INFORMATION AND ANSWERS TO YOUR QUESTIONS, CALL:

1 (800) 442-1902, in Canada call 1 (800) 387-0369.